Home >> News

What should be Paid Attention to When Using Stainless Steel Filter Mesh?

May. 13, 2020

In this age of technological prosperity in the 21st century, we need to continuously accelerate our own pace. Perhaps there are many new types of equipment that we have not heard of, but we still need to understand to facilitate the use in the future. In today's rapidly developing industry, the assistance of stainless steel filter meshes is also inseparable. Therefore, Filtration Element Wholesale introduces you to some of the application methods and characteristics of stainless steel filter meshes.

Ti Powder Sintered Filter Cartridge

Ti Powder Sintered Filter Cartridge

This equipment is classified as a flammable item, and it must be paid attention to during the transportation, installation and operation process, and it must not be close to the fire source. In order to ensure the best function of the equipment, it should be used in a ventilated and dry environment. It is necessary to check whether the inlet and drain pipes of the equipment are outstanding. If there is leakage, it is very likely to cause damage to the equipment.

Equipment must first check the condition of the motor before installing the device and must use a stable line with correct capacity. For the maintenance of the device, the demand needs to be planned according to the actual operating conditions and requirements. The operating environment must not contain corrosive substances.

In order to ensure that the equipment can exert normal power, it must be used under suitable temperature and humidity. If it is used in an area with relatively dirty air, you can consider installing a layer of filter in it.

Ti Powder Sintered Filter Cartridge is a rigid filter material, mainly used in chemical, pharmaceutical, metallurgy, food and other industries.

There are generally two types of stainless steel sintered filter elements: tube and plate. The tubular sintered filter element is made of multi-layer stainless steel mesh after high-temperature firing and then welded into a tubular shape. The nozzle is welded to the same material flange and nozzle. It is commonly used in filter tanks (reactors) in the petrochemical and pharmaceutical industries. Filter element, in order to improve production efficiency in industry, the length of the filter element is continuously increased. When applied in new fields, the filter environment has stricter requirements on the filter element.

Therefore, the weld between the dense flange and the porous tube is the sensitive part of the entire filter element. The strength of the weld directly affects the quality of the entire element, which is related to whether it can improve the tensile strength, fatigue strength and resistance of the weld. Wear strength. The sheet-shaped stainless steel sintered filter element is a stainless steel sintered mesh that is mechanically punched into meshes of various sizes and shapes.

Our company also has Particle Removing Filtration Cartridge for sale, please contact us.