Home >> News

How to Clean the Plate Type Filter?

Sep. 08, 2020

As a China Air Filter Element Supplier, share with you. The plate filter generally refers to the plate air filter.

Plate Type Filter is widely used in steel, electronics, chemical, automotive, environmental protection and power industries. It is the best air intake filter equipment for centrifugal compressor filter house. And coarse filtration of dust and oil for various air conditioning systems. The product filter material is composed of synthetic glass fiber. Its dust holding capacity is large, the service cycle is long, and it is mostly used for air primary filtration.

Plate Type Filter

Plate Type Filter

Product Features

Compared with ordinary glass fiber mesh or man-made fiber filter, the filter has a stronger filtering effect and service life;

The design of galvanized iron mesh can protect the filter material from damage and effectively prevent the filter material from deforming due to pressure;

It can be used to protect the high, medium and primary efficiency filters in the air conditioning system;

The filter screen has the characteristics of low pressure loss, large dust collection capacity and long service life.

Panel air filter cleaning

1. Open the suction grille in the device, press and hold the buttons on both sides and gently pull down;

2. Drag the hook on the air filter and pull out the device diagonally downward;

3. Use a device similar to a vacuum cleaner to remove the dust, or rinse with warm water;

4. If there is too much dust, you can use a soft brush and neutral detergent to clean it. After cleaning it, shake the water and place it in a cool place to dry;

5. Never use hot water above 50℃ for cleaning to avoid discoloration or deformation of the equipment, and do not dry it on fire;

6. After cleaning, be sure to install the equipment. When installing, hang the equipment on the protruding part of the suction grille, then fix it on the suction grille, and slowly slide the back handle of the suction grille inward. , Until the entire device is pushed into the grille;

7. The last step is to close the suction grille, which is exactly the opposite of the first step. Press and hold the filter signal reset button on the control panel, and the cleaning reminder sign will disappear at this time;

8. In addition, remind everyone that if there is too much dust in the environment where the air filter is used, the number of cleanings should be increased according to the situation, generally once every six months is appropriate.

Our company also has Metal Filter Cartridge on sale, welcome to contact us.