Industrial single cartridge filter housing adopts the integrated casting top structure. Based on top in/out design, with the adaptor, it can be directly connected to the pipeline.
Industrial single cartridge filter housing adopts the integrated casting top structure. Based on top in/out design, with the adaptor, it can be directly connected to the pipeline.
The filter housing is sanitary grade with polishing precision Ra< 0.6um. It can meet many kinds of filtration demands.
This filter housing is of compact structure and the top can be fixed in the pipeline. The filter housing can be open when the cartridge needs to be changed. There is no leakage.
Drain valve is at the bottom and convenient for the liquid discharge.
1. The filter owns top entry and top out structure, and can be directly connected to the pipeline.
2. It is easy to change cartridge and no liquid leakage.
3. Drain valve is at the bottom. It is convenient for the liquid discharge.
4. Safety seal design.
1. Water treatment: all kinds of water filtration
2. Food and beverage: wine, mineral water, drinking water filtration.
3. Chemical industry: all kinds of organic solvents, acid, base filtration.
| Max. Operating pressure | 0.6MPa, 1.0 MPa |
| Max. Operating temperature | 150℃ |
| Shell | 304/316L |
| drain valve | 304 |
| Gasket | EPDM,PTFE,VITON, SILICONE |
| Shell | Tri-clamp, thread |
| Inlet-outlet-N1，N2 | 1" thread |
| Pressure gauge-N3 optional | 1/4"thread |
| Vent valve-optional | 1/4"thread |
| Cartridge connection | DOE |
| Finish type | base：castShell：mechanical/electrolytic polishing |
| Polishing precision | Inner 0.6umOuter 0.8um |
| Single cartridge | |||
| 10" | 20" | 30" | |
| A: total height | 625 | ||
| B: distance from inlet to center | 110mm | ||
| C: diameter | 101.6mm | ||
| D: inlet-outlet N1，N2 | 1" | ||
